CATA/GLOPanel cutting system
Synced on this device
Sheet optimization / 2D

Cutting plan
in progress.

Configure the sheet and add the parts. The plan is recalculated in real time, respecting kerf, edges and grain direction.

MULTI-MATERIAL ENGINE ACTIVE 1 MATERIAL 0 OFFCUTS IN USE
Boards used010 offcuts · 1 materials
Material yield53.3%
Output count09 / 09production complete
Required edge banding0 m0 finished edges
Optimization decision / P1

Choose what to prioritize

Cataglo calculates both plans with the same parts, inventory, grain, trimming and kerf.

Equivalent result
With the current prices and costs, both strategies produce the same result. Enter sheet prices and cost per cut for a financial comparison.
MI
Professional quote / P1

Mi carpintería

Configure your workshop and client details.

COT-PENDIENTEARS 0.00Customer price · internal margin 30%
DepositARS 0.00BalanceARS 0.00Valid untilNovember 02, 2026
Estimated costing / project

Cost summary

Waste is already included in the material used and is not added to the total again.

Material usedARS 0.00Sheets ARS 0.00 · offcuts ARS 0.00
Cutting serviceARS 0.0018 estimated cuts
Edge bandingARS 0.000 meters
Waste includedARS 0.002.35 m² · 46.7%
Job totalARS 0.00material + cuts + edge banding
Material recovery / P1

Automatic offcut inventory

Cataglo detects reusable free spaces. When production is registered, it deducts used boards, adds offcuts and records every movement.

Recoverable offcuts062.22 m² reusable
Current inventory000 recorded movements
Melamina principal87.24 × 110.66 cm · 0.97 m²Melamina principal56.4 × 54.34 cm · 0.31 m²Melamina principal56.4 × 54.34 cm · 0.31 m²
This operation is performed once per job version.
Workspace / graphic output

Sheet map

F01 · Bajo mesadaF02 · Alacena
275 cm183 cm
///

Melamina principal · new sheetPlaca estándar · 275 × 183 cm

STATUS · OK
Operating order / P1

Cut sequence

Numbered passes in an order compatible with the plan's guillotine cuts.

18cuts · sheet 01
↗ Hover over a step to see it on the plan.Kerf 0.32 cmCheck support, waste side and dimensions before cutting.
Production manifest

Parts list

09 UNITS
PartFurnitureDimensionsQty.Actions
LateralesGrain parallel to width · No edge bandingBajo mesadaMelamina principal · 18 mm72 × 56 cm2
Piso y techoGrain parallel to width · No edge bandingBajo mesadaMelamina principal · 18 mm56.4 × 56 cm2
PuertasGrain parallel to width · No edge bandingAlacenaMelamina principal · 18 mm70 × 39.7 cm2
EstantesGrain parallel to width · No edge bandingAlacenaMelamina principal · 18 mm76.4 × 30 cm3